Die Cut Projects – Cordoba by Sue Wilson (for Creative Expressions)

Every now and then I’m asked to work on specific projects under a publication embargo – so the blog goes quiet as I’m furiously working but can’t show you anything 😦

Today’s post is an example of such projects – they feature the Cordoba die cut set from Creative Expressions, designed by Sue Wilson. Sue herself has approved their publication, which is around a month after I made them, so apologies if I don’t quite remember all the steps!

Creative Expressions have produced a fantastic range of dies and stamps by Sue Wilson – I’ve been given the Spanish inspired design ‘Cordoba’ to play with. This card is the first I produced with the three piece die set.

You will need:
Creative Expressions Cordoba Die Set
Creative Expressions Singles Set of 2 stamps: Perfect Poppy
Creative Expressions Self Adhesive Pearls: Cream (3mm & 5mm)
Cosmic Shimmer Specialist Acrylic Glue
Foundations A4 card: Rich Plum / Milk
Ranger Perfect Medium Pad: Clear
Ranger Distress Ink Pad: Seedless Preserves

1. Die cut the middle die twice from the Rich Plum card. Mount one onto your card using foam pads. Cut the leaf corners from the second, and stick to the card using Cosmic Shimmer Glue, as shown.
2. Die cut the large frame die from the Milk card and emboss. Cut out the centre round the inner embossed line. Mount onto the previous layer with foam pads.
3. Die cut the inner oval frame from Milk card and mount in the centre of the card with foam pads. Repeat, this time embossing and then trimming off the border to make the sentiment mount. Edge with Seedless Preserves Distress Ink and stamp with the sentiment from the Perfect Poppy set in the same colour. Mount on the card with foam pads.
4. Finally, cut a strip of Rich Plum card 1cm wide for the bottom border and embellish with the self-adhesive pearls, or use Cosmic Shimmer Pearlescent PVA.

– – – = – – –

 

 

This frame is inspired by the colours in the Cordoba Mosque, rich blues and golds. The image in the background is a doorway in that very mosque. The frame itself is built up with 5mm foamboard, with the die cut pieces layered over, and thin strips of card pushed round to cover over the thickness of the board. Finally I shaped real brass sheet round the whole thing to create the outer frame.

You will need:
Creative Expressions Cordoba die set
Creative Expressions Woven Leaves Pre Cut Stamp
Cosmic Shimmer Embossing Powder: Bright Gold Metallic
Foundations A4 Card: Cobalt
Ranger Perfect Medium Ink Pad: Clear
Walnut Hollow Metal Roll: Brass

1. Cut a sheet of the Cobalt card in half to make two A5 pieces.
2. Stamp the Woven Leaves onto one using the Perfect Medium, cover with the embossing powder, tap off the excess and heat set. When cool, cut out the centre.
3. Using the large frame, die cut the second card piece to make the dotty frame.
4. Cut a piece of foamboard to A5 size and mount your choice of image onto it. Make a border of foamboard around 1cm wide, and then mount the embossed card sheet onto the top.
5. Repeat the border on this layer, and before sticking on the dotty frame, cover the thickness with a strip of the Cobalt card, gluing into place with the Cosmic Shimmer Glue.
6. Add the dotty layer, and then a final border.
7. Carefully wrap pieces of the brass sheet round the whole frame from the internal edge round the top and wrapping it to the back. You may find it helpful to use high tack double sided tape to secure it in place.

 

Country Garden Gift Boxes (for Craftwork Cards)

Here are four gift boxes, with self-designed construction, featuring the new, and fabulous, Country Garden papers from Craftwork Cards. They are embellished with Card Candi from the same range, as well as paper bows from the offcuts. A smidge of Liquid Pearls here and there, and hey presto, a lovely project. And they got even more air time during the Craftwork Cards Birthday Bonus on Create & Craft on 15th/16th April – thank you Julie!

Full instructions and links to the templates are available at the Craftwork Cards Blog, here.

 

Even more samples on TV…

Being on a design team is all about working to deadlines. Julie Hickey does such a stunning job when presenting on Ideal World/Create & Craft TV, you really don’t get even the slightest hint of the frenetic activity behind the scenes. Now I have no idea what was happening at Craftwork Cards HQ, but I do know that the samples that I had to make up didn’t arrive as planned and had to be emailed to me at about 10:30 and I had these three samples into the post by 4:15pm for special delivery the next day for the show that evening. How’s that for pressured deadlines – and I wasn’t the only one… being on a DT isn’t all fun 😉

All three projects feature the brand new Country Garden papers. The first is a small pop-up box card with punched roses. The second is an adapted large pop-up box, with freehand cut vase filled with roses. I cut one of the sheets to resemble a table cloth, cutting the corners off the flaps and adding two pop-up triangles to create the ‘table’ surface as the card opens up. The vase and flowers are mounted on springs:
This way, the card still fits in the envelope, but depth still appears as the card opens. The card is braced by a tabbed insert that keeps it open and the table top taut. The final one is a self-closing collapsable box which I have created and decorated up. All of the papers are edged with Victorian Velvet Distress Ink for a bit of definition.

The samples all featured on the Craftwork Cards Pick of The Day shows on Tues 1st – Wed 2nd April, although if you blinked you’ll have missed them as the paper packs and card packs sold out and the samples weren’t featured in later shows. Good for CWCs, but not so much for me 😉

Topiary Trees with Candi

I’m a bit behind on my posts this week… This is a pair of topiary trees that I made especially for the Craftwork Cards Candi Week, and they’re a giveaway prize over at their blog (still chance to enter if you’re really quick!). To see more on how I made them, go to this post. The planters are made from sheet greyboard, covered with titan buff acrylic and weathered with dry brushed Vintage Photo Distress Paint and Distress Ink. The balls are 8mm beads skewered onto cocktail sticks. The trunks of the trees are wound paper, and I rumpled tissue paper round it to add a bark effect.

 

Good Ol’ Sport Journal (for Jones Crafts)

I’ve just received my DT goodies from Jones Crafts, and this time, I have the Graphic 45 Good Ol’ Sport Collection of papers to play with. Just as well it’s vintage and paper, as those that know me well know that I don’t do sport!

In what is fast becoming a trademark makeover, I’ve taken the sheet of 4×6″ prints, cut them up, added some more pages using the other papers and wire bound them using my Zutter Bind-it-All. The front and back covers have faux rusted enamel finish using clear embossing powder and Vintage Photo Distress Ink and Distress Powder. Everything else is  aged with Vintage Photo Distress Ink. I created the photo corners by making a cut file and cutting them out on the Silhouette Cameo, before colouring with Tarnished Brass Distress Stain, sticking them together and then inserting the collector’s cards from two other sheets from the collection. Add in some of the chipboard tags and die cuts for tags, and paper ribbons and it’s done. Here’s a clickable gallery for close ups:

Upcycled Mini-Egg Tube Storage Solution

The master of crafty invention, Tim Holtz (along with his friends at Ranger Ink), has come up with a brand new mini-applicator tool for the ever popular Distress Inks – if you’ve not come across it yet, it’s circular and smaller than his previous rectangular ones. I’m still waiting on my order for the tool, but I had a delivery of the replacement foams…

I came up with a storage dispenser for the foams, but the design was a little flimsy and I wasn’t entirely happy with it. As I was munching through some Cadbury’s mini-eggs (don’t you just love this time of year?) I was pondering the design… and then realised as I was about to chuck the tube away that it might be the solution. A quick check showed it was just the right diameter to take the foams, and a new design was born. Before… and after:

Botanica goes three dimensional

I’ve created these two pieces for Craftwork Cards using their fabulous Botanica kit which includes papers, die cut toppers and bows as well as the Candi – read more over at their blog!

Kitsch Easter Basket

 

I’ve done another 3D item using the Craftwork Cards Kitsch kit recently featured on Create and Craft TV – I recommend leaving buying the mini eggs until just before you finish the item, else the basket seems half empty by the end of the project. More pics and a tutorial over at the Craftwork Cards blog.

 

Time Flies Encased Quotation

Over at The Crafting Cafe, it’s been the theme of embossing all month sponsored by my friends at WOW! Embossing Powders, and my DT project makes great use of embossing powder to encase elements of the beautiful Time Flies papers from Craftwork Cards. Pop over to my post to read more details of how to make the piece… it’s just 5cm in diameter in case you were wondering…

 

 

Ickle Birdy House (for Creative Expressions)

As well as the two background stamps I got sent to use this month, Creative Expressions also sent me their Pronty MDF bird house. This comes as a flat pack, with laser cut elements still attached. Not satisfied with it remaining flat, and becoming a fan of assemblage and shadowboxes, I decided to make it deeper by adding a foamboard frame and roof, decorated it up with acrylics and embellished mercilessly with flowers and distress ink.